In this article, you will learn how to upgrade CentOS 7 to CentOS 8 Linux, including application software, that are already installed on your Linux operating system.
Table of Contents:
- How to Upgrade to CentOS 8?
- Environment Specification
- Gathering System Information
- Installing EPEL yum Repository on CentOS 7
- Installing Required Packages on CentOS 7
- Removing Duplicate/Unused Packages and Configurations
- Upgrade Package Manager from YUM to DNF
- Upgrading CentOS 7 Packages to Latest Stable Versions
- Upgrading Yum Repositories from CentOS 7 to CentOS 8
- Upgrading CentOS 7 to CentOS 8 Server
- Verify Software Versions after Upgrade to CentOS 8
- Conclusion
How to Upgrade to CentOS 8? :
CentOS 8 has been released and most of the organizations looking forward to upgrade their existing installations of Linux servers.
Here, you will perform a complete upgrade of your operating system from CentOS 7 to 8 along with already installed applications (Apache web server) and databases (MySQL server).
There are many alternate ways to upgrade CentOS 7 to 8.
The most popular and relatively easy method is to fresh install and configure CentOS 8 machine in parallel with our existing CentOS 7 machine and then migrate the applications and databases to the new upgraded machine each at a time.
But, we are executing an in-place upgrade of an existing CentOS 7 server with all installed applications and databases to the latest versions provided by CentOS 8 Linux operating system.
Since you are upgrading your data center from CentOS 7 to 8, therefore, it is recommended that you should also upgrade yourself and your technical resources as well.
For this purpose, we highly recommend that, you should read Red Hat RHCSA 8 Cert Guide: EX200 (Certification Guide) by Pearson IT Certification or it is even better if you can attend an online Linux training like Linux Command Line Masterclass with RHCSA & RHCE - 12 hours!
Environment Specification:
We are using a virtual machine with following specifications, You can provision a same Linux server by following our tutorial on how to install LAMP Stack on CentOS 7.
- CPU - 3.4 Ghz (2 cores)
- Memory - 2 GB
- Storage - 20 GB
- Operating System - CentOS 7.7
- Hostname - centos-7-server.centlinux.com
- IP Address - 192.168.116.215 /24
Gathering System Information:
Connect with centos-7-server.centlinux.com as root user by using a ssh client.
Check the current version of your Linux Kernel.
# uname -r
3.10.0-1062.7.1.el7.x86_64
Check the current version of your Apache web server.
# httpd -v
Server version: Apache/2.4.6 (CentOS)
Server built: Aug 8 2019 11:41:18
Check the current version of your PHP programming language.
# php -v
PHP 5.4.16 (cli) (built: Nov 1 2019 16:04:20)
Copyright (c) 1997-2013 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2013 Zend Technologies
Check the current version of your MySQL database server.
# mysql -V
mysql Ver 15.1 Distrib 5.5.64-MariaDB, for Linux (x86_64) using readline 5.1
Open URL http://centos-7-server.centlinux.com in a web browser. You may need to create a phpinfo page just as we did in our another guide about how to install Multiple PHP versions on Linux.
Installing EPEL yum Repository on CentOS 7:
You are required some software packages that are not available in standard yum repositories therefore you have to install EPEL (Extra Packages for Enterprise Linux) yum repository before upgrade to CentOS 8 operating system.
Install epel-release package to enable EPEL yum repository on your Linux operating system.
# yum install -y epel-release.noarch
Build cache for EPEL yum repository.
# yum makecache fast
EPEL yum repository for CentOS 7 has been installed.
Installing Required Packages on CentOS 7:
You need rpmconf and yum-utils while upgrading CentOS 7 to 8. Therefore, install these software packages by using yum command.
# yum install -y yum-utils rpmconf
Removing Duplicate/Unused Packages and Configurations:
Locate and remove conflicting configuration files (.rpmnew, .rpmsave and .rpmorigfiles) by using rpmconf command. These files are created by Linux Package Manager during installation of a new version of an already installed software package.
# rpmconf -a
Configuration file `/etc/nsswitch.conf'
-rw-r--r--. 1 root root 1746 Dec 22 2018 /etc/nsswitch.conf
-rw-r--r--. 1 root root 1938 Aug 7 04:00 /etc/nsswitch.conf.rpmnew
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
M : merge configuration files
Z : background this process to examine the situation
S : skip this file
The default action is to keep your current version.
*** aliases (Y/I/N/O/D/Z/S) [default=N] ?
Your choice:
List down the packages that are not required by any other installed software.
# package-cleanup --leaves
Loaded plugins: fastestmirror
bind-libs-lite-9.11.4-9.P2.el7.x86_64
libsysfs-2.1.0-16.el7.x86_64
List down older or duplicate software packages that are not available in active yum repositories.
# package-cleanup --orphans
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirrors.ges.net.pk
* epel: my.fedora.ipserverone.com
* extras: mirrors.ges.net.pk
* updates: repo.isra.edu.pk
kernel-3.10.0-957.el7.x86_64
Uninstall all the software packages that are listed by the above package-cleanup commands.
# yum remove -y \ > bind-libs-lite-9.11.4-9.P2.el7.x86_64 \ > libsysfs-2.1.0-16.el7.x86_64 \ > kernel-3.10.0-957.el7.x86_64
Upgrade Package Manager from YUM to DNF:
In CentOS 8, the default Linux package manager, yum has been replaced by the dnf (Dandified Yum).
Therefore, you have to switch to the dnf package manager before starting CentOS 7 to 8 upgrade process.
Install dnf package manager by using yum command.
# yum install -y dnf
Yum is not required anymore, therefore you must remove it by executing dnf command.
# dnf remove -y yum yum-metadata-parser
Remove any left behind yum configurations.
# rm -Rf /etc/yum
Rebuild cache for yum repositories.
# dnf makecache
Extra Packages for Enterprise Linux 7 - x86_64 54 kB/s | 16 MB 05:08
CentOS-7 - Base 991 kB/s | 10 MB 00:10
CentOS-7 - Updates 1.2 MB/s | 7.0 MB 00:05
CentOS-7 - Extras 1.5 MB/s | 251 kB 00:00
Metadata cache created.
Upgrading CentOS 7 Packages to Latest Stable Versions:
Your Linux server is now ready to upgrade to CentOS 8.
Execute the following command at Linux Bash to update software packages to latest versions as provided by CentOS 7 yum repositories.
# dnf upgrade -y
Upgrading Yum Repositories from CentOS 7 to 8:
To upgrade your yum repositories, you have to upgrade centos-release package from CentOS 7 to 8.
# dnf upgrade -y http://mirror.centos.org/centos/8/BaseOS/x86_64/os/Packages/{centos-release-8.1-1.1911.0.8.el8.x86_64.rpm,centos-gpg-keys-8.1-1.1911.0.8.el8.noarch.rpm,centos-repos-8.1-1.1911.0.8.el8.x86_64.rpm}
Upgrade EPEL yum repository from EL 7 to EL 8.
# dnf upgrade -y epel-release
Build cache for newly installed yum repositories.
# dnf makecache
Extra Packages for Enterprise Linux 8 - x86_64 30 kB/s | 5.2 MB 02:57
CentOS-8 - Base 0.0 B/s | 0 B 00:00
CentOS-8 - AppStream 0.0 B/s | 0 B 00:00
CentOS-8 - Extras 0.0 B/s | 0 B 00:00
Metadata cache created.
All of our yum repositories has been upgraded from CentOS 7 to CentOS 8.
Upgrading CentOS 7 to CentOS 8 Server:
Remove all installed kernels by executing following rpm command.
# rpm -e `rpm -q kernel`
If the above command provides any conflicting package, then you must to remove that package before uninstalling the Linux Kernels.
We have only one conflicting package i.e. sysvinit-tools, so we are removing it by using rpm command.
# rpm -e --nodeps sysvinit-tools
Please ensure that, you have removed all the conflicting software packages before moving forward. You have to repeat the rpm -e ‘rpm -q kernel’ command again after removing the conflicting packages.
Upgrade Linux operating system by executing following command at Linux Bash.
# dnf -y --releasever=8 --allowerasing --setopt=deltarpm=false distro-sync
After successful execution of previous command, install the new CentOS 8 kernel core. You can also read our previous article, if you want to upgrade to latest Linux kernel.
# dnf install -y kernel-core
Install Minimal and Core package groups on the server.
# dnf -y groupupdate "Core" "Minimal Install"
Reboot your operating system to load new Linux Kernel.
# systemctl reboot
Verify Software Versions after Upgrade to CentOS 8:
After reboot, check version of installed Linux Kernel.
# uname -r
4.18.0-147.3.1.el8_1.x86_64
Check version of installed Apache web server.
# httpd -v
Server version: Apache/2.4.37 (centos)
Server built: Dec 23 2019 20:45:34
Check version of installed PHP programming language.
# php -v
PHP 7.2.11 (cli) (built: Oct 9 2018 15:09:36) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.2.0, Copyright (c) 1998-2018 Zend Technologies
Check version of installed MySQL database server.
# mysql -V
mysql Ver 15.1 Distrib 10.3.17-MariaDB, for Linux (x86_64) using readline 5.1
Open URL http://centos-7-server.centlinux.com in a web browser.
Conclusion:
In this article, You have successfully upgrade your Linux server from CentOS 7 to CentOS 8, along with all the installed databases and applications.
